JETFIGHTER III 3Dfx / MMX UPDATE By popular demand, here is the first 3Dfx / MMX version of JetFighter III. This version is being provided on an "as-is" basis and is considered an "Alpha" release. Please read this entire document for VERY IMPORTANT information about this version. INSTALLATION ------------ - Thoroughly read this document!! Very, super, MEGA important! - Download JF33DFX1.EXE (it is about ?? size) - Copy the update file into your JetFighter III directory by typing: COPY A:\JF33DFX1.EXE C:\JF3 [Enter] - Switch into the JetFighter III directory: CD \JF3 [Enter] - Decompress the update by typing: JF33DFX1 [Enter] - Apply the patch by typing: UPDATE [Enter] - Run JetFighter III as normal, and press [Shift][V] when in the simulator to enter 3Dfx mode. This version is a "quick port" and does not necessarily take FULL advantage of either the 3Dfx or MMX technologies. However, it does run MUCH faster! We wanted to post this version as soon as possible to let our customers enjoy JetFighter III at a MUCH higher frame rate. 3Dfx INFORMATION ---------------- This version of JetFighter III should run on any 3Dfx based graphics accelerator. In general, you should see a performance increase of 400% or better. Because we wait for the vertical retrace synch to reduce flicker, you will see a maximum frame rate of 60 frames per second. [Shift][V] Toggles between 3Dfx mode and VGA mode. Great to show off your new graphics card! [Ctrl][B] Toggles bilinear filtering on and off. Bilinear filtering will reduce the texture "aliasing" or jittering in the background. This will make the image look softer and a bit "blurrier". MMX INFORMATION --------------- This version of JetFighter III will automatically detect and use MMX instructions if your computer supports them. MMX provided between 5 and 15% performance increase over the non MMX version. Because MMX code is currently only used in the graphics rendering portion of JetFighter III, MMX will not currently speed up the game if you are already using a 3Dfx graphics accelerator. DISCLAIMER / FEEDBACK --------------------- This is an "alpha" 3Dfx version of JetFighter III. This means that not all of the features have been implemented, and problems may still exist. We have tested this 3Dfx / MMX version of JetFighter III in-house and have corrected any problems that we have found. However, problems may still occur and we are looking for your feedback. Please send any comments or suggestions to jf3team@missionstudios.com. DO NOT send regular JetFighter III technical questions to this address! REQUIREMENTS ------------ - An original retail version of JetFighter III installed and working properly on your hard disk. - 16 Meg of RAM. The original JetFighter III would run in 8 Meg, but this update, and all subsequent versions of JetFighter III will require 16 Meg of RAM. - A 3Dfx based 3D graphics accelerator card installed and working in your system. These include: - Diamond Monster 3D - Orchid Righteous 3D - RealVision Flash 3D - Hercules Stingray 128-3D - Quantum3D - Guillemot MaxiGamer 3Dfx LIMITATIONS / BUGS / UNFINISHED ITEMS ------------------------------------- - This version DOES NOT include the F-14 and therefore SHOULD NOT be used with any of the missions on the Enhanced Campaign CD. A version with the F-14 will be available soon. Until then, DO NOT select the F- 14 in Free Flight or Instant Mission modes and DO NOT run any missions from the Enhanced Campaign CD! You will get an error. - This version does not check for a 3Dfx card, so don't hit [Shift][V] if you don't have a 3Dfx in your system. The program will probably exit. A new version that automatically detects the 3Dfx card will be uploaded soon. - The 3Dfx mode will only look correct in 640x480. In other resolutions you will see the game in a small window on the screen. - Due to the limited resolution of the 3Dfx Z-buffer, you may see some strange effects when clouds intersect the mountains, and when buildings intersect distant terrain. We are working to reduce this effect and will post updates when it is remedied / reduced. - This quick 3Dfx port uses EXACTLY the same textures and color palette as the original JetFighter III. We are working on improved textures which will dramatically improve the look of the game when running on 3D hardware. - With bilinear filtering turned on [Ctrl][B], you may see some textures exhibit "seams". This is a problem with the texture art and we are working to solve this. - In some cases you may see a "hesitation" or "tearing" appear in the scene. This is due to an extremely fast frame rate, usually above 45fps. We are working to reduce this effect. - The distant scenery may look strange at times due to incorrect textures being displayed. - Very distant runways may be visible through some parts of the terrain. QUESTIONS AND ANSWERS --------------------- Q. Hey, this looks just like VGA mode! A. Did you hit [Shift][V]? You must press [Shift][V] to enter 3Dfx mode! Q. The 3Dfx version won't run on my computer! A. You must have a retail version of JetFighter III, and then update it with this 3Dfx version in order to run the game in 3Dfx mode. Q. I can't run any of the missions on the Enhanced Campaign CD! A. You're Right! As mentioned above in this file, this first 3Dfx update does not include the F-14, which is required by many of the Enhanced Campaign CD missions. Hang on, and the next update will include the F-14. Q. Why didn't you make the textures better? It looks drab. A. As we mentioned at the beginning of this document, this is a QUICK PORT designed to give our users a FREE update to JetFighter III that runs 4 times faster than the original version. We are currently working on exploiting the full capabilities of 3Dfx and MMX. Later enhancements will include vastly improved texture colors, additional special effects, and possibly even higher frame-rates. Q. Will JetFighter III run even faster if I have a card with 2 3Dfx chips on it? A. No. We don't use any dual-pass texturing techniques right now. It is possible that later versions of JetFighter III will make use of multiple-chip accelerators. Q. Why did JetFighter III gain so much from 3Dfx acceleration while some products only seem twice as fast. A. Good Question! The original "software only" version of JetFighter II used an extremely sophisticated software rendering system patterned after advanced image generators like those used in military simulations. This engine included the ability to do perspective correct texturing, light source shading, smooth shading, z-buffering, haze and transparency all at the same time. This makes the image look fantastic, but slows the game down because of all the calculations required to draw the images. Fortunately, the 3Dfx chip is capable of handling ALL of the features that we needed, and it does them VERY quickly, so it accelerated almost every part of our drawing. Most other games don't use such a complex renderer and therefore don't take as full advantage of the 3Dfx chipset as JetFighter III does. Q. What do I have to do to get MMX working on my system? A. Nothing. If your computer has a MMX chip in it, JetFighter III will automatically detect and use its MMX features. QUESTIONS AND FEEDBACK ---------------------- If you have questions about this version, or have some suggestions for us, please send e-mail to jf3team@missionstudios.com. Please understand we are a small company and due to the popularity of this update we may not be able to answer all of your e-mail directly, but we will note your comments and suggestions. For non-3Dfx related technical support, please e-mail our customer support staff at t2support@take2games.com. Sending regular technical support questions to any address other than t2support@take2games.com may considerably delay the response.